F34 Carbon Steel Strainer - EN Material
The F34 is a steel Y-filter with integral flanges, in EN material. The standard perforation of the sieve in sizes DN15 to DN80 is 0.8 mm. In sizes DN100 to DN200, the standard perforation is 1.6 mm. Optionally, a different perforation or mesh size is available, as well as Monel sieves.
The sieve cap can be provided with a threaded bore if blow-off or drain valves are needed.
A steel filter for low temperatures is available upon request.
Standards:
These products fully comply with the European Pressure Equipment Directive.
Certificates:
These products are available with a Typical Test Report or with a certificate according to EN 10204 3.1 for the housing and the filter cap. All certification/inspection requirements must be specified when ordering.
Filter Screen Options: Stainless Steel (RVS) Perforation 1.6 mm (DN15 to DN80)
3 mm (DN15 to DN200)
Mesh 40, 100, 200
Monel
Perforation 0.8 mm (DN15 to DN80)
1.6 mm (DN100 to DN200)
3 mm (DN15 to DN200)
Mesh 100
Connection opening for blow-off or drainage valve:
see datasheet
Diameters and Connections:
DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, and DN200
Flanges according to EN1092 PN40