Fig 33 Cast Iron Strainer
The F33 is a cast iron Y-filter with flange connection and stainless steel sieve. The filters with a diameter of DN15 to DN80 have a sieve with standard perforation of 0.8mm. The filters with a diameter of DN100 to DN200 are equipped with a sieve with standard perforation of 1.6mm.
Optionally available with Monel sieve and other perforations. The sieve cap can be drilled and tapped for the installation of a blow-off or drainage valve.
Standards:
These products fully comply with the European Pressure Equipment Directive 97/23/EC.
Certificates:
These products are available with a Type Test Report.
Filter Screen Options:
Stainless Steel (RVS)
Perforation 1.6mm (DN15 to DN80)
3.0mm (DN15 to DN200)
Mesh 40, 100, 200
Monel
Perforation 0.8mm (DN15 to DN80)
1.6mm (DN100 to DN200)
3.0mm (DN15 to DN200)
Mesh 100
Connection opening for blow-off or drainage valve:
see datasheet
Installation:
In horizontal or vertically descending pipes, with the flow direction indicated by the arrow on the housing. In a horizontal steam or gas pipe, install the filter with the axis of the sieve in the horizontal plane (to prevent water accumulation). In a liquid system, install the filter with the sieve cap at the bottom.
Diameters and Connections:
DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, and DN200.
For DN65 to DN200, we offer the standard type F3716.
Standard flanges: EN 1092 PN16, AS2129 Table F, ASME 150 (DN15 & 20), and ASME 125 (DN25 to DN200).