Login
Quotation list
Get in contact +31(0)26 370 6830

EBWGE-GG-MET-350/MW

Welke lengte heeft u nodig?
/
U heeft 0 stuks nodig voor 0 euro incl. BTW
Size connection
Material
Sealing
Ask for quotationAdd to wish list

The specified delivery times are the working days or working weeks specified by the manufacturer.

If the delivery time is critical for you, please contact us so that we can check the delivery time for you.

Delivery time on request
Add to favorites

Why Ebora :

  • We think with you
  • Clear offers
  • Flexible and proactive
  • knowledgeable
  • knowledgeable
  • Product description and specifications
  • Documents
  • Accessories
  • Ask a Question

Barcode

Product description

Knife gate valve with one-piece centering housing for clamping between flanges according to EN 1092-1 type 11 form B - PN10. For flanges according to ANSI 150 on request. With this slide, the pressure is applied from one side, sealing on one side). Side parts made of epoxy-coated steel enable easy assembly of electro / mechanical or inductive limit switches. The operation to open and close the material slide is done by means of a hand wheel.


Other drive types can be ordered in our shop, for example:

  • Hand lever
  • pneumatic drive (double or single acting)
  • electric drive
  • hydraulic drive

 

Flow media

Liquids and contaminated media with fiber content, viscous media, waste water, sewage sludge, food, etc. (plastic granulates, powder, sand or similar materials on request). Not suitable for steam.

 

Housing

GG-25, primed and polyester coated (baked 190 °, 20min) or stainless steel 1.4408. Overall length according to EN 558-1 row 20.

 

Seat seal

Depending on the version, metal or soft sealing with NBR, EPDM, FKM, silicone or PTFE seal

 

Stuffing box packing

3-piece seal set, standard:
1x synthetic fiber, PTFE-coated, PTFE / oil filling
1x edge-reinforced (Kevlar®) seal
1x NBR, EPDM or FKM ring (bulk goods on request)

 

Other pack designs are available, for example:

  • X ring
  • Edge reinforced seal
  • Copper seal
  • Stainless steel seal

 

Polished blade (knife)

Material: stainless steel 1.4307 or 1.4404


Other knife designs are available, for example:

  • hardened
  • polished
  • MPF-coated: non-stick and highly resistant to acids and chemicals

 

Spindle

Double-bearing, non-rising spindle with trapezoidal thread. The slide blade is only guided against or against the seal at the end of the closing process, so there is no dragging during the adjustment process and therefore a lower torque.
Material: stainless steel 1.4305 or 1.4404.


Leak rate

Please note that a leak rate of 0.4% of the Kv value is to be expected with metal-to-metal-sealing gate valves (low-viscosity media).

 

Further variants of the EBWGE knife gate valve can be ordered online in our shop:

  • Knife gate valve in nominal widths from DN50 to DN400, larger nominal widths on request
  • Knife gate valve for pressurization on both sides (bidirectional)
  • Knife gate valve with ATEX approval for use in explosive atmospheres.


The nuts of the stuffing box must be adjusted after assembly. Please note the installation and operating instructions for commissioning and our technical data sheets for further information and operating conditions!


Kevlar® is a registered trademark of DuPont


Documents

Specifications

Seal EPDM
Metal sealing
Nitrile rubber (NBR)
Viton rubber (FKM/FPM)
BrandWatergates
CategoryGate valves
Tags Appendages Plaatafsluiter meskantafsluiters schuifkleppen messchuiven spadekleppen
Product code10007588
UnitPiece (s)

Accessories

EBWGS-LP-100
Product code: 4024

Ask a question about this product

         

Get in touch!

+31(0)26 370 6830

Request an account!

info@ebora.nl

Get in touch!

info@ebora.nl

Request an account!

+31(0)26 370 6830

Shopping cart

Quotation list

Clear filters

Filter

Cancel
Confirm