Login
Quotation list
Get in contact +31(0)26 370 6830

EBWGE-GG-EPDM-250/PD

Welke lengte heeft u nodig?
/
U heeft 0 stuks nodig voor 0 euro incl. BTW
Size connection
Material
Sealing
Ask for quotationAdd to wish list

The specified delivery times are the working days or working weeks specified by the manufacturer.

If the delivery time is critical for you, please contact us so that we can check the delivery time for you.

Samengesteld
Add to favorites

Why Ebora :

  • We think with you
  • Clear offers
  • Flexible and proactive
  • knowledgeable
  • knowledgeable
  • Product description and specifications
  • Documents
  • Accessories
  • Ask a Question

Barcode

Product description

EBWGP Knife-Gate-Valve pneumatic single acting with spring return:

Advice

The products descript in this documentation in the conditions of our delivery are partly completed machinery according to annex 2 paragraph g of the directive 2006/42/EC on machinery, which must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC on machinery, where appropriate. Please take notice to the Declaration of incorporation and the assembly instruction.

  

EBWGP Knife-Gate-Valve pneumatic double acting:

Installation

All knife-gate valves should be installed vertically up to max. 45° to the vertical. For other installation positions e.g. horizontally it is necessary to ensure that especially for larger diameters and actuators no bending stress appear at the stem/top- bridges, piston- stem etc., otherwise the function of the actuator and the tightness of the valve is not guaranteed. In such cases protective features are definitely needed.

A hanging installation of the knife-gate vale must be avoided!

Advice

The products descript in this documentation in the conditions of our delivery are partly completed machinery according to annex 2 paragraph g of the directive 2006/42/EC on machinery, which must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC on machinery, where appropriate. Please take notice to the Declaration of incorporation and the assembly instruction.

 

 


EBWGP Knife-Gate-Valve pneumatic single acting with spring return:

normally closed

DN50 … DN300

SPECIFICATION:

DESIGN

Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B - PN10 (former DIN 2501). ANSI 150 on request.

MEDIA

Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. 

BODY

  • GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min)
  • stainless steel 1.4408

 

SEALING

  • Metal/metal
  • NBR
  • EPDM

(FKM or PTFE on request)

 

GLAND

3-piece sealing set:

  • 2x synthetic fibre, PTFE-coated
  • 1x NBR-, EPDM or FKM-ring

 

KNIFE

Stainless steel 1.4301 or. 1.4401 (304 or 316)

STEM

Stainless steel 1.4305 or 1.4404 (304 or 316)

FUNCTION

Pneumatic single acting with spring return, normally closed (NC).

PRESSURE DISCHARGE

One-sided, two-sided on request

PILOT PRESSURE

6 bar

PILOT MEDIA

Filtered, slightly oiled air (subject to remaining oil, dust and water). According at least to ISO 8571, ISO 8573 or PNEUROP 6,661.

PRESSURE RANGE

Please refer to the table

TEMPERATURE RANGE

  • metal: on request
  • NBR: -25°C ... +90°C
  • EPDM: -35°C ... +120°C

Attention: Temperature range not for all media.

 

FACE TO FACE

EN 558-1 Row 20

INSTALLATION

Only with vertical upwards actuator

 

The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

 

 

EBWGP Knife-Gate-Valve pneumatic double acting

DN50 … DN400

SPECIFICATION:

DESIGN

Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B - PN10 (former DIN 2501). ANSI 150 on request.

MEDIA

Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam.

BODY

  • GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min)
  • stainless steel 1.4408.

SEALING

  • Metal/metal
  • NBR
  • EPDM

(FKM or PTFE on request)

 

GLAND

3-piece sealing set:

  • 2x synthetic fibre, PTFE-coated
  • 1x NBR-, EPDM or FKM-ring

 

KNIFE

Stainless steel 1.4301 or. 1.4401 (304 or 316) STEM Stainless steel 1.4305 or 1.4404 (304 or 316) FUNCTION Pneumatic double acting

PRESSURE DISCHARGE

One-sided, two-sided on request

PILOT PRESSURE

6 bar (lower pressure on request)

PILOT MEDIA

Filtered, slightly oiled air (subject to reamaining oil, dust and water). According at least to ISO 8571, ISO 8573 or PNEUROP 6,661.

PRESSURE RANGE

Please refer to the table

TEMPERATURE RANGE

  • metal: on request
  • NBR: -25°C ... +90°C
  • EPDM: -35°C ... +120°C

Attention: Temperature range not for all media.

 

FACE TO FACE

EN 558-1 Row 20

 

The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

 


Documents

Specifications

Seal EPDM
Metal sealing
Nitrile rubber (NBR)
Viton rubber (FKM/FPM)
BrandWatergates
CategoryGate valves
Tags Ebora Appendages Schuifafsluiter EBWGE-GG-EPDM-250/PD
Product code10007552
UnitPiece (s)

Accessories

EBWGS-PV-PD-230AC/B
Product code: 4032

Ask a question about this product

         

Get in touch!

+31(0)26 370 6830

Request an account!

info@ebora.nl

Get in touch!

info@ebora.nl

Request an account!

+31(0)26 370 6830

Shopping cart

Quotation list

Clear filters

Filter

Cancel
Confirm