ARI-FABA Plus Valve with bellows seal
Extra tight seal due to cut-off effect (line contact seal)
Benefit from the proven power of our 100% tight shut-off technology!
For all standard applications
Even better performance…
- ... through the hood design (now even more suitable for harsh industrial environments, i.e. water hammer, due to a more robust design).
- …due to the reinforced bellows welded to the stem instead of the plug (vibrations are no longer transferred directly from the plug to the bellows).
Reliable sealing…
- … by “cutting effect” (line contact sealing of the conical plug on the seat ring).
- … by metal plug / seat design (hardness gradient: hardened) stainless steel plug, harder than the seat ring).
- … due to increased seating pressure (longer service life).
- … due to the valve cover design (now even more suitable for harsh industrial environments, i.e. water hammer, due to the robust design).
- … due to the fine-wire handle (increased seating pressure).
- Tested tightness: final test with air for all valves (leakage “A” according to DIN EN 12266 or 1 according to DIN 3230).
- Tested tightness: Helium test guarantees that no leakage can occur through the bellows.
Easy to use …
- … due to ergonomic handle with environmentally friendly, corrosion-resistant cataphoretic coating.
- … due to the reduction in weight (optimized valve cover design).
- … through the recessed grease nipple and the separate, flat lock.
- … due to the easy-to-install limit switches – no need to loosen the screws of the valve cover (patented).
Even more versatility…
- … by the dual function (usable at the same time as a check valve and shut-off valve with a tight shut-off function due to the screwed-on check valve) – now suitable for horizontal or vertical installation thanks to: the return spring.
Available in a straight, angled or angled seat design with butt weld, threaded socket or ASME/ANSI connections.
Version: DIN EN, ASME/ANSIA
Materials: Cast Iron, SG Iron, Steel, Forged Steel, Stainless, Steel, ASME Materials
Nominal diameter: DN 15-400
Nominal pressure: PN 16-40; ANSI 150 and 300
Process Connection: Flanges, Weld Ends, Weld Socket, Thread
The type numbers ARI-FABA Bellow valves of ARI-Armaturen which fall below are
Productinformatie
- ARI-FABA Plus 12046, PN 16 EN-JL1040 Straight through
- ARI-FABA Plus 12046, PN 16 EN-JL1040 Straight through
- ARI-FABA Plus 12046, PN 16 EN-JL1040 Straight through
- ARI-FABA Plus 12046, PN 16 EN-JL1040 Straight through
- ARI-FABA Plus 12047, PN 16 EN-JL1040 Angle pattern
- ARI-FABA Plus 22046, PN 16 EN-JS1049 Straight through
- ARI-FABA Plus 22046, PN 16 EN-JS1049 Straight through
- ARI-FABA Plus 22046, PN 16 EN-JS1049 Straight through
- ARI-FABA Plus 22046, PN 16 EN-JS1049 Straight through
- ARI-FABA Plus 22047, PN 16 EN-JS1049 Angle pattern
- ARI-FABA Plus 23046, PN 25 EN-JS1049 Straight through
- ARI-FABA Plus 23046, PN 25 EN-JS1049 Straight through
- ARI-FABA Plus 23046, PN 25 EN-JS1049 Straight through
- ARI-FABA Plus 23046, PN 25 EN-JS1049 Straight through
- ARI-FABA Plus 35046, PN 40 1.0619+N Straight through
- ARI-FABA Plus 35047, PN 40 1.0619+N Angle pattern
- ARI-FABA Plus 35066, PN 40 1.0619+N Y-pattern
- ARI-FABA Plus 45040, PN 40 10460 Straight through
- ARI-FABA Plus 45046, PN 40 10460 Straight through
- ARI-FABA Plus 52046, PN 16 14408 Straight through
- ARI-FABA Plus 52069, PN 16 14408 Y-pattern
- ARI-FABA Plus 55046, PN 40 14408 Straight through
- ARI-FABA Plus 55066, PN 40 14581 Y-pattern
- ARI-FABA Plus 55069, PN 40 14408 Y-pattern
- ARI-FABA Plus 62046, PN 16 1.4408 / 1.0619+N Straight through
- ARI-FABA Plus 62069, PN 16 1.4408 / 1.0619+N Y-pattern
- ARI-FABA Plus 65046, PN 40 1.4408 / 1.0619+N Straight through
- ARI-FABA Plus 65069, PN 40 1.4408 / 1.0619+N Y-pattern
Features
- Maintenance-free metal straight valve with flanges
- Cast iron housing EN-JL1040 with primer,
- Spindle sealing by double-walled stainless steel bellows of 1.4571,
- Inner parts 1.4021 + QT, fine thread spindle with external and coiled thread, flat funnel nipple,
- recessed latch,
- Heat Dissipation for Fittings
- Optimized snap-on lid made of EN-JS 1049,
- safety stuffing box,
- Detachable anti-twist device with
- Display device, tight fitting,
- Leakage rate A according to EN12266
- non-rising metal handwheel with cataphoresis coating,
- Limit switch can be retrofitted during operation,
- fully insulated according to
- Building Energy Act - GEG, TA-Luft
- TÜV test no. TA 07 2016 C04 (EN ISO 15848-1)
- Build length: according to EN558 / 1
- Medium temperature: -10 - + 300 ° C
- Nominal pressure: PN 16
- Cone design: rim seat (throttle function)
Applications:
Recycling facilities
chemical industry
hospital technology
process water installations
installations with aggressive media
Medium:
Process water
aggressive media