EBMEMG2S
EBMEMA(L)(M)(F)2S
Stainless Steel
Seat valve with diaphragm sealing
SPECIFICATION
DESIGN
Seat valve with diaphragm sealing
OPERATION
2/2-ways. Servo-assisted. Normally closed. When the coil is energized the plunger opens a pilot drilling where the media, which is on top of the diaphragm and keeps it closed, is released. The input pressure lift the diaphragm and opens the valve. When the coil is de-energized the plunger closes the pilot drilling, that pressure is restored on top of the diaphragm, causing the valve to shut. The minimum pressure (0,5 bar) is absolutely necessary as pressure difference between input and output of the valve.
MATERIAL
- Body: Stainless Steel 1.4408
- Internal parts: Stainless steel
- Sealing: NBR ( FKM, EPDM)
CONNECTION
- B.S.P. threaded connection G1 /4 - G1 (DIN ISO 228 T1)
- welded connection acc. to DIN 3239
- welded connection acc. to DIN 11850-2
- welded connection acc. to ISO 4200 Flanged connection PN16
CABLE CONNECTION
AC or DC with connection socket according to DIN 43650
VOLTAGES
- 12, 24, 110, 196 V (DC)
- 24, 42, 110, 230 V 50Hz (AC)
POWER CONSUMPTION
11 watts, 24/15 VA
DUTY CYCLE
100% continuous rating
PROTECTION
IP 65 acc. to DIN 40050 with connection socket according to DIN 43650.
PRESSURE RANGE
See table overleaf
MEDIA
Gases and liquids up to 22 mm2 /s
TEMPERATURE RANGE
-10°C bis +80°C
TEMPERATURE OF THE ENVIRONMENT
max. +35°C
Attention: At standard coils the temperature of the coil could raise up to 155 °C dependent on the operating conditions.
INSTALLATION
As desired, vertical preferred
The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!
